Space coordinates, relations between lines and planes, and the surface areas and volumes of prisms, pyramids, cylinders, cones and spheres, with angles and distances in space.
A point in space is fixed by three coordinates (x, y, z). The distance between two points is d = √[(x₂−x₁)² + (y₂−y₁)² + (z₂−z₁)²].
Two lines can be parallel, intersect, be perpendicular, or be skew (neither parallel nor intersecting). A line perpendicular to a plane is perpendicular to every line in that plane through the foot.
The angle between a line and a plane is the angle between the line and its projection on the plane.
Three mutually perpendicular number lines meeting at the origin O form a right-handed coordinate system. From O the x-axis runs forward, the y-axis to the right and the z-axis upward; a point P is written P(x, y, z), and the three numbers are its signed distances from the three coordinate planes. The planes x = 0, y = 0 and z = 0 cut space into eight octants, and every point that is not on a plane belongs to exactly one of them.
Two consequences are used in almost every question. The projection of P(x, y, z) on the xy-plane is (x, y, 0), its projection on the x-axis is (x, 0, 0), and the other four projections follow the same pattern by deleting the coordinates that do not belong to the target. A point lies on a coordinate plane exactly when the matching coordinate is zero, so "the point is in the xy-plane" is an equation z = 0, not a picture.
Distance and midpoint are the two measurements the whole chapter is built on. The distance formula is the Pythagorean theorem applied twice: once across the base rectangle and once up the vertical edge. The midpoint formula is the ordinary average, coordinate by coordinate.
If a point is given as a ratio instead of a midpoint, the section formula applies: the point dividing AB in the ratio m : n internally has coordinates (n x₁ + m x₂)/(m + n) and similarly for y and z. Setting m = n returns the midpoint, which is a useful self-check.
Every line in space is fixed by one point and one direction, and every plane by one point and one normal. Writing them with vectors turns each geometric question into a dot product or a cross product, which is why the vector method is usually faster than constructing auxiliary lines.
The normal of a plane is read straight off its Cartesian equation: for 2x − 3y + z = 5 the normal is (2, −3, 1). This single observation answers most "is the line parallel to the plane" questions before any algebra starts.
Two lines in space can stand in exactly four relations. Three of them are familiar from plane geometry; the fourth exists only in space and is the one examiners like to test.
To classify two lines, test in this order. First compare direction vectors: if they are parallel, the lines are parallel or coincident (check one point). If not, try to solve for a common point: a solution means intersecting. If there is no solution, the lines are skew. A compact coplanarity test is (P₂ − P₁) · (a × b) = 0; when it holds the lines are coplanar, and when it fails they are skew.
The angle between two skew lines is defined by translating one of them parallel to itself until it meets the other; the acute angle between the two directions is the answer. Because of the absolute value in the formula, the result is always between 0° and 90°.
A line and a plane can be contained (the line lies in the plane, infinitely many common points), parallel (no common point), or intersecting at exactly one point. Perpendicular is the special case of intersecting in which the angle is 90°. Deciding between them needs only the direction a of the line and the normal n of the plane: if a · n = 0 the line is parallel to the plane or inside it, and a single point distinguishes the two; if a = k n the line is perpendicular to the plane.
The definition of perpendicularity is stronger than it looks: a line perpendicular to a plane is perpendicular to every line in that plane that passes through the foot. Conversely, if a line is perpendicular to two intersecting lines of a plane at their point of intersection, it is perpendicular to the whole plane. That converse is the standard tool for proving perpendicularity without coordinates. Two lines perpendicular to the same plane are parallel to each other, and two planes perpendicular to the same line are parallel.
The angle between a line and a plane is the angle between the line and its orthogonal projection on the plane, which is always the smallest angle the line makes with any line of the plane. In vector form the projection direction is the component of a perpendicular to n, so the sine appears instead of the cosine.
The theorem of the three perpendiculars is worth memorising because it saves a whole construction: if PA is perpendicular to plane α at A, and a line l in α passes through A and is perpendicular to AB, where B is any point of l, then l is perpendicular to PB. In words, a line in the plane perpendicular to the projection is perpendicular to the oblique line itself.
Two distinct planes are parallel when they have no common point, and they intersect in a straight line otherwise. Coincident planes are the degenerate case of parallel planes at distance zero. Perpendicular planes are the special case of intersecting planes whose dihedral angle is 90°.
The dihedral angle is the space version of an angle: it is formed by two half-planes with a common edge. To measure it, pick a point on the edge and draw, inside each face, a ray perpendicular to the edge at that point; the angle between the two rays is the plane angle of the dihedral angle, and it does not depend on where on the edge the point was chosen. Two planes are perpendicular exactly when this angle is 90°, equivalently when one plane contains a line perpendicular to the other, equivalently when n₁ · n₂ = 0.
A useful construction: to find the dihedral angle between two faces of a solid, drop a perpendicular from a point of one face to the common edge, then join its foot to a suitable point of the other face. The two segments are both perpendicular to the edge, so the angle between them is the plane angle you need.
Every distance in the chapter is the length of the shortest segment, and the shortest segment is always perpendicular to the object you are measuring to. That single principle replaces four separate formulas if you can see the right triangle; the formulas below are the shortcut when the coordinates are given.
In a solid, the distance from a vertex to a face is the height, the distance from a vertex to an edge is measured in the plane containing both, and the distance between two skew edges (for example two opposite edges of a tetrahedron) is the segment joining their midpoints. Recognising which of these three you are looking at is most of the work.
| Solid | Lateral area | Total area | Volume |
|---|---|---|---|
| Cuboid | 2(ab + bc + ac) | 2(ab + bc + ac) | abc |
| Prism | base perimeter × height | lateral + 2 × base | base area × height |
| Cylinder | 2πrh | 2πr² + 2πrh | πr²h |
| Pyramid | — | — | ⅓ × base area × height |
| Cone | πrl | πr² + πrl | ⅓πr²h |
| Sphere | — | 4πr² | ⁴⁄₃πr³ |
For a cone, l is the slant height and l² = r² + h².
The table below is the one to memorise, in this order: flat-sided solids first, round solids second, truncated solids third. In every row B is the base area, P is the base perimeter, h is the perpendicular height and l is a slant height (of a lateral face for a pyramid, of the generator for a cone).
| Solid | Lateral area | Total area | Volume |
|---|---|---|---|
| Cube, edge a | 4a² | 6a² | a³ |
| Cuboid, edges a, b, c | 2c(a + b) | 2(ab + bc + ca) | abc |
| Right prism | P h | P h + 2B | B h |
| Oblique prism | (perimeter of right section) × lateral edge | lateral + 2B | B h |
| Regular pyramid | ½ P l | ½ P l + B | ⅓ B h |
| General pyramid | sum of the lateral faces | sum of faces + B | ⅓ B h |
| Cylinder | 2π r h | 2π r² + 2π r h | π r² h |
| Cone | π r l | π r (r + l) | ⅓ π r² h |
| Cone frustum, radii R and r | π (R + r) l | π (R + r) l + π R² + π r² | ⅓ π h (R² + R r + r²) |
| Pyramid frustum, bases B₁ and B₂ | ½ (P₁ + P₂) l | ½ (P₁ + P₂) l + B₁ + B₂ | ⅓ h (B₁ + B₂ + √(B₁ B₂)) |
| Sphere | none | 4π r² | ⁴⁄₃ π r³ |
| Hemisphere | 2π r² (curved only) | 3π r² (with the flat disc) | ⅔ π r³ |
Three of these rows are worth deriving once so they stop being arbitrary. The lateral area of a cylinder is a rectangle of width 2πr and height h, which is why it is 2πrh. The lateral area of a cone is a sector of radius l whose arc is 2πr, so its area is ½ × 2πr × l = πrl. The lateral area of a regular pyramid is n congruent isosceles triangles, each of area ½ × side × l, and the sides add up to P.
Nearly every mistake in this topic comes from using h where l belongs. The three relations below connect the two, and each is one right triangle inside the solid.
For a regular polygon with n sides of length s, the base area is B = ½ P a and the apothem is a = s / (2 tan(180°/n)). The three polygons that appear in CSCA items are the equilateral triangle (B = √3 s² / 4, a = s√3 / 6), the square (B = s², a = s/2) and the regular hexagon (B = 3√3 s² / 2, a = s√3 / 2).
Two solids are similar when one is a scaled copy of the other, so every pair of corresponding lengths is in the same ratio k. Areas behave like k² and volumes like k³, because area is a product of two lengths and volume of three. This single rule answers a whole family of questions that would otherwise need every dimension computed.
Two consequences are tested often. Doubling every edge of a solid multiplies its surface area by 4 and its volume by 8, so a model at twice the scale needs four times the paint and holds eight times the water. And among all solids of a given volume, the sphere has the smallest surface area, which is why bubbles and droplets are round; among boxes of a given volume, the cube is the most economical.
Scale factors also work backwards: a solid cut by a plane parallel to its base produces a smaller solid similar to the whole, with ratio equal to the ratio of the heights. That is the fastest route to "the top part of a cone after cutting at half the height has one eighth of the volume", since (1/2)³ = 1/8.
Figure 1: cylinder and cone. With the same base radius and height, the cone is one third of the cylinder — the quickest way to remember the factor ⅓.
The cuboid below is drawn in oblique perspective: the front face is a true rectangle, the receding edges are drawn at an angle and shortened, and the three edges that cannot be seen are dashed. Read the labels as the three dimensions a, b and c, and note that the yellow segment is the space diagonal, the only segment that runs from one corner to the opposite corner through the interior.
Caption. Three edges a, b, c meeting at a corner determine the cuboid completely; the space diagonal satisfies d² = a² + b² + c², which is the distance formula applied to the two opposite corners. The two dashed edges at the back and the dashed edge joining the hidden corner are conventions: they are not shorter, they are simply behind the solid.
Notice also that the diagonal of the front face is √(a² + c²) and the space diagonal is √(a² + c² + b²). That is the double Pythagorean step in the picture, and it explains why the space diagonal is always longer than any face diagonal.
A sphere has no edges and no flat faces, so its diagrams carry only circles. The useful distinction is between a great circle, whose plane passes through the centre, and a small circle, whose plane does not. The red ellipse is the equator, a great circle seen at an angle; the pale ellipse is the meridian, another great circle; the yellow dashed ellipse is a small circle at a higher latitude.
Caption. Every great circle has radius r and splits the sphere into two equal hemispheres; a small circle has a smaller radius, and its radius is √(r² − d²) where d is the distance from the centre to its plane. A plane cuts a sphere in a circle, never in any other curve, and the largest such circle is the great circle.
This is the picture behind the sphere formulas. Slicing the sphere into thin horizontal discs and adding their volumes gives ⁴⁄₃πr³; the surface area 4πr² is exactly four times the area of the great circle, a coincidence worth remembering as a check.
Solid diagrams are drawn in perspective, so equal lengths do not look equal and right angles do not look like right angles. Trust the labels and the stated data, never the drawing. Mark on the figure the triangle that contains the unknown: in a pyramid it is usually the triangle formed by the height, the apothem of the base and the slant height; in a cone it is the right triangle with legs r and h and hypotenuse l; in a frustum it is the right triangle with legs h and R − r.
A second habit helps with composite solids: redraw the solid with the hidden edges dashed and then isolate one flat face at a time in the margin. Most three-dimensional problems reduce to two or three plane right triangles once the picture is taken apart.
For r = 3: V = ⁴⁄₃π(27) = 36π ≈ 113.1.
Between (1, 2, 3) and (4, 6, 3): √(9 + 16 + 0) = 5.
r = 3, h = 4, so l = 5; volume = ⅓π(9)(4) = 12π and lateral area = π(3)(5) = 15π.
A cuboid has edges 3 cm, 4 cm and 12 cm. Find its space diagonal, its total surface area and its volume.
The numbers 3, 4, 12 are chosen so that the diagonal is an integer, which is the exam's way of telling you the method is right.
A closed cylindrical can has radius 7 cm and height 10 cm. Using π = 22/7, find its lateral area, total area and volume.
If the question says the can is open at the top, the total becomes 440 + 154 = 594 cm². Reading "closed" or "open" is worth more marks than any formula here.
A cone has slant height 13 cm and base radius 5 cm. Find its height, volume and total surface area.
Check the two formulas use different heights: the volume uses h = 12, the area uses l = 13. Mixing them is the single most common error in cone questions.
A regular pyramid has a square base of side 6 cm and height 4 cm. Find the slant height, the lateral area, the total area and the volume.
Note that the lateral edge is longer than the slant height: the lateral edge is √(4² + (3√2)²) = √34, because it runs to a corner rather than to the midpoint of a side.
A bucket is a cone frustum with base radii 6 cm and 3 cm and height 4 cm. Find its slant height, lateral area, total area and volume.
A frequent wrong answer is ⅓πh(R² + r²) = 60π, which forgets the middle term Rr. The three-term form is the one to memorise: it collapses to πr²h when R = r.
Two similar closed containers have heights 20 cm and 30 cm. The smaller one needs 240 mL of paint for its outside. How much paint does the larger one need, and what is the ratio of their volumes?
The trap is answering 360 mL by scaling the paint linearly. Ask yourself what the paint is spread over: an area, so the square applies.
A plane has normal vector n = (1, 1, √2) and a line has direction vector a = (1, 1, 0). Find the angle between the line and the plane.
General rule: line with line uses cos, line with plane uses sin, plane with plane uses the angle between normals.
A closed cylinder must hold 1000 cm³. Show that the surface area is least when the height equals the diameter.
With calculus the same result comes from dS/dr = 4πr − 2000/r² = 0. Either route earns full marks if the reasoning is stated; the AM-GM route avoids derivatives entirely.
| Solid | Volume | Relation to the sphere |
|---|---|---|
| cylinder (r, 2r) | 2πr³ | 1.5 × the sphere |
| sphere (r) | ⁴⁄₃πr³ | — |
| cone (r, 2r) | ⅔πr³ | half the sphere |
The two columns differ by the bases, and nothing else. Before substituting, count how many flat faces the solid actually has in the situation described: a pipe has no bases, a closed can has two, a bucket has one, a tent usually has one floor.
| Solid | Lateral area | Total area | What the difference is |
|---|---|---|---|
| Cube | 4a² | 6a² | two square bases, a² each |
| Cuboid | 2c(a + b) | 2(ab + bc + ca) | two rectangles ab |
| Right prism | P h | P h + 2B | two congruent polygons |
| Cylinder | 2πrh | 2πr² + 2πrh | two discs, πr² each |
| Cone | πrl | πr(r + l) | one disc, πr² |
| Regular pyramid | ½ P l | ½ P l + B | one polygon |
| Hemisphere | 2πr² | 3πr² | the flat circular disc |
| Sphere | 4πr² (there is no lateral face) | 4πr² | nothing: the sphere has no base |
A quick check on any answer: the total must be larger than the lateral, and for a cone the total is πr(r + l), which is lateral plus exactly one base. If your total is smaller than your lateral, you subtracted a base instead of adding one.
There are only three volume ideas in the whole topic, and the table makes that visible. Learn the families, not twelve separate formulas.
| Family | Solids | Volume | Why it works |
|---|---|---|---|
| Uniform cross-section | cuboid, cube, any prism, cylinder | V = B h | every slice parallel to the base is congruent to the base |
| Tapering to a point | pyramid (any base), cone | V = ⅓ B h | the slices shrink linearly, and the sum is one third of the prism on the same base |
| Truncated | pyramid frustum, cone frustum | V = ⅓ h (B₁ + B₂ + √(B₁B₂)) for polygons, ⅓πh(R² + Rr + r²) for circles | difference of two similar tapering solids |
| Round and closed | sphere, hemisphere | ⁴⁄₃πr³, ⅔πr³ | a hemisphere is half the sphere |
The frustum formula deserves a second look. When the two bases are equal, √(B₁B₂) = B and the bracket becomes 3B, so the formula returns Bh: the frustum has become a prism. When the upper base shrinks to zero, the bracket becomes B₁ and the formula returns ⅓B₁h: the frustum has become a pyramid. A formula that contains both limiting cases is almost certainly right, and this is a fast way to check a memory slip in the exam.
| Quantity | Vector formula | Range |
|---|---|---|
| Angle between two lines | cos θ = |a · b| / (|a||b|) | 0° to 90° |
| Angle between line and plane | sin θ = |a · n| / (|a||n|) | 0° to 90° |
| Angle between two planes | cos θ = |n₁ · n₂| / (|n₁||n₂|) | 0° to 90° |
| Point to plane | |a x₀ + b y₀ + c z₀ + d| / √(a² + b² + c²) | 0 or positive |
| Point to line | |AP × a| / |a| | 0 or positive |
| Skew lines | |(P₂ − P₁) · (a × b)| / |a × b| | 0 only if they meet |
All three angle formulas carry an absolute value, which is what forces the acute answer; the obtuse supplement is never the angle between two objects in space, only the angle between two oriented vectors.
In the exam: most items ask for a volume, area or distance, and the numbers are usually chosen to give a clean answer — a messy surd is a signal to recheck.
The list below is ordered by how often the error appears in marked scripts. Each row gives the mistake, the reason it happens, and the correction to write down before substituting.
| Mistake | Why it happens | Correction |
|---|---|---|
| Using V = Bh for a pyramid or a cone | the prism formula is learned first and is the default | write V = ⅓Bh on the line before substituting; the ⅓ belongs to anything that tapers to a point |
| Using the diameter as the radius | the figure labels the full width | halve it first and write r = d/2 explicitly, then substitute |
| Reporting lateral area when total area was asked | the lateral formula is shorter and comes to mind first | underline the word total, then add the bases: count them from the wording (closed, open, pipe, tank) |
| Using the height h in ½Pl for a pyramid | h and l are both called "height" | l is the slant height of a face; compute it with l² = h² + a² before using the area formula |
| Using h in πrl for a cone | the cone's h is drawn inside the solid and looks like the side | l is the generator, the slanted edge; the volume uses h, the area uses l |
| Frustum lateral area with h instead of l | the frustum is treated as a short cylinder | compute l² = h² + (R − r)², then use π(R + r)l |
| Frustum volume without the middle term | ⅓h(R² + r²) looks plausible and is shorter | use ⅓πh(R² + Rr + r²); test it with R = r, where it must give πr²h |
| Assuming a line perpendicular to one line of a plane is perpendicular to the plane | the plane case is confused with the plane-geometry case | it must be perpendicular to two intersecting lines of the plane; one line is never enough |
| Using cos for the line-plane angle | every other angle formula uses cos | line-plane uses sin, because the angle is measured from the projection, not from the normal |
| Scaling volume by k instead of k³ | the ratio of the lengths is applied to everything | lengths k, areas k², volumes k³; decide which quantity the question asks for before multiplying |
Volume of a cube of edge 4.
Solution: 64.
Surface area of a sphere of radius 2.
Solution: 4π(4) = 16π.
Cylinder with r = 2, h = 5: find the volume.
Solution: π(4)(5) = 20π.
Pyramid with a 6 × 6 square base and height 5.
Solution: ⅓ × 36 × 5 = 60.
A cuboid has edges 4 cm, 4 cm and 7 cm. Find its space diagonal, total area and volume.
Solution: d = √(16 + 16 + 49) = √81 = 9 cm. S = 2(16 + 28 + 28) = 144 cm². V = 4 × 4 × 7 = 112 cm³.
A cube has edge 5 cm. Find the length of its space diagonal, its total area, and the area of the triangle formed by three diagonals of three faces meeting at one vertex.
Solution: d = 5√3 cm. S = 6 × 25 = 150 cm². The three face diagonals are each 5√2, so the triangle is equilateral with area (√3/4)(5√2)² = (√3/4)(50) = 12.5√3 cm².
A right prism has an equilateral triangle base of side 4 cm and height 10 cm. Find its lateral area, total area and volume.
Solution: B = (√3/4)(16) = 4√3 cm², P = 12 cm. Lateral = 12 × 10 = 120 cm². Total = 120 + 8√3 cm². Volume = 4√3 × 10 = 40√3 cm³.
A cylinder has radius 3 cm and height 8 cm. Find its lateral area, total area and volume, leaving π in the answer.
Solution: Lateral = 2π(3)(8) = 48π cm². Bases = 2π(9) = 18π cm², so total = 66π cm². Volume = π(9)(8) = 72π cm³.
A cone has radius 6 cm and height 8 cm. Find its slant height, lateral area, total area and volume.
Solution: l = √(36 + 64) = 10 cm. Lateral = π(6)(10) = 60π cm². Total = 60π + 36π = 96π cm². Volume = ⅓π(36)(8) = 96π cm³.
A sphere has radius 6 cm. Find its surface area and volume, and the volume of the largest cube that fits inside it.
Solution: S = 4π(36) = 144π cm². V = ⁴⁄₃π(216) = 288π cm³. The cube's space diagonal is the diameter 12, so a√3 = 12, a = 4√3, and the cube volume is (4√3)³ = 192√3 cm³.
A regular triangular pyramid has base side 6 cm and height 4 cm. Find its volume and its lateral area.
Solution: B = (√3/4)(36) = 9√3 cm², so V = ⅓(9√3)(4) = 12√3 cm³. The apothem of the base is a = 6√3/6 = √3, so l = √(16 + 3) = √19 cm. P = 18 cm, lateral = ½(18)(√19) = 9√19 cm².
A cone frustum has radii 8 cm and 4 cm and height 3 cm. Find its slant height, lateral area, total area and volume.
Solution: l = √(9 + 16) = 5 cm. Lateral = π(12)(5) = 60π cm². Bases = 64π + 16π = 80π, so total = 140π cm². Volume = ⅓π(3)(64 + 32 + 16) = 112π cm³.
Two similar pyramids have heights in the ratio 3 : 5. The smaller has volume 54 cm³ and surface area 90 cm². Find the volume and surface area of the larger.
Solution: k = 5/3, k³ = 125/27, so V = 54 × 125/27 = 250 cm³. k² = 25/9, so S = 90 × 25/9 = 250 cm². The coincidence of 250 in both answers is accidental, not a rule.
A cube has edge 6 cm. A sphere is inscribed in it, touching all six faces. Find the volume of the sphere and the fraction of the cube's volume it fills.
Solution: the diameter equals the edge, so r = 3 and V = ⁴⁄₃π(27) = 36π cm³. The cube is 216 cm³, so the fraction is 36π/216 = π/6, about 0.524.
A solid is made of a cylinder of radius 2 cm and height 6 cm with a hemisphere of the same radius on top. Find its total surface area and volume.
Solution: the flat top of the cylinder is covered, so the surface is the cylinder's lateral area, its bottom disc, and the curved hemisphere: 2π(2)(6) + π(4) + 2π(4) = 24π + 4π + 8π = 36π cm². Volume = π(4)(6) + ⅔π(8) = 24π + 16π/3 = 88π/3 cm³.
Find the distance from the point P(1, 2, 3) to the plane 2x + 2y − z = 5.
Solution: rewrite as 2x + 2y − z − 5 = 0. Then d = |2(1) + 2(2) − 3 − 5| / √(4 + 4 + 1) = |−2| / 3 = 2/3.
Find the angle between the lines with direction vectors a = (1, 1, 0) and b = (0, 1, 1).
Solution: a · b = 1, |a| = |b| = √2, so cos θ = 1/2 and θ = 60°.
A closed cylinder has volume 128π cm³ and height 8 cm. Find its radius, then its total surface area.
Solution: πr²(8) = 128π gives r² = 16, r = 4 cm. Total = 2π(16) + 2π(4)(8) = 32π + 64π = 96π cm².
Free · three languages · works offline