Home · Lessons · Physics

Physics

Thermodynamics

This thermodynamics lesson explains heat, work, internal energy, the ideal gas laws, the four laws of thermodynamics, and heat engine efficiency, with solved examples.

In this lesson
  1. Basic Concepts and Definitions
  2. Laws and Main Formula Tables
  3. Schematic and Explanatory Diagrams
  4. Detailed Solved Examples
  5. Important Comparison Tables
  6. CSCA Tips and Common Mistakes
  7. Additional Exercises with Solutions

Basic Concepts and Definitions

Thermodynamics is the branch of physics that studies heat, work, and internal energy, and the relationships between them. It is based on four fundamental laws.

Basic Concepts

Specific Heat and Latent Heat

ConceptFormulaUnit
Sensible heat\(Q = mc\Delta T\)J
Latent heat (change of state)\(Q = mL\)J
Enthalpy\(H = U + PV\)J

The Ideal Gas

The ideal gas is a simplified model of a real gas in which the volumes of the particles and their interactions are neglected. The ideal gas law: \(PV = nRT\).

Laws and Main Formula Tables

Ideal Gas Laws

LawFormulaCondition
Boyle's law\(P_1V_1 = P_2V_2\)Constant \(T\)
Charles's law\(\frac{V_1}{T_1} = \frac{V_2}{T_2}\)Constant \(P\)
Gay-Lussac's law\(\frac{P_1}{T_1} = \frac{P_2}{T_2}\)Constant \(V\)
Combined gas law\(\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}\)Constant \(n\)
Ideal gas law\(PV = nRT\)General

The Three Laws of Thermodynamics

LawStatementFormula
Zeroth lawIf A is in thermal equilibrium with B, and B with C, then A is in equilibrium with C (the basis of temperature measurement)—
First lawEnergy is neither destroyed nor created; it only changes from one form to another\(\Delta U = Q - W\)
Second lawThe total entropy of the system and surroundings increases for spontaneous processes\(\Delta S_{\text{universe}} > 0\)
Third lawAt \(T = 0\, \text{K}\), the entropy of a perfect crystal = 0\(S \to 0\) as \(T \to 0\, \text{K}\)

Heat Engine Efficiency

ConceptFormula
Heat engine efficiency\(\eta = \frac{W}{Q_h} = 1 - \frac{Q_c}{Q_h}\)
Carnot cycle efficiency (maximum)\(\eta_{max} = 1 - \frac{T_c}{T_h}\) (temperatures in kelvin)
Refrigerator coefficient of performance\(COP = \frac{Q_c}{W}\)

Schematic and Explanatory Diagrams

Drawing 1: The Carnot Heat Cycle

Carnot Cycle — PV DiagramPV1. Isothermal expansion T_h (hot)2. Adiabatic expansion3. Isothermal compression T_c (cold)4. Adiabatic compressionThe area inside the cycle = W (the work done)

Drawing 2: Energy Transformations in the Heat Engine

Heat Engine — the Law of Conservation of EnergyEngineW (work)Q_h(heat from the hot reservoir)Q_c (heat expelled to the cold reservoir)η = W/Q_h = 1 - Q_c/Q_h

Drawing 3: The Change-of-State Curve (Phases of Matter)

Heating Curve — Change of State of MatterTimeTSolidMeltingLiquidBoilingGas

Detailed Solved Examples

Example 1: The Ideal Gas Law

A balloon contains 2 moles of helium gas at a temperature of \(27^\circ\text{C}\) and a pressure of \(1.5\, \text{atm}\). Calculate the volume of the balloon. (\(R = 0.0821\, \text{L·atm/(mol·K)}\)).

Solution:

We convert the temperature to kelvin: \(T = 27 + 273 = 300\, \text{K}\).

\(PV = nRT\) → \(V = \frac{nRT}{P} = \frac{2 \times 0.0821 \times 300}{1.5} = \frac{49.26}{1.5} = 32.84\, \text{L}\).


Example 2: The First Law of Thermodynamics

A gas expands from a volume of \(V_1 = 0.02\, \text{m}^3\) to \(V_2 = 0.05\, \text{m}^3\) at a constant pressure of \(P = 1.5 \times 10^5\, \text{Pa}\). During the expansion, the gas absorbs an amount of heat \(Q = 8000\, \text{J}\). Calculate: a) The work done. b) The change in the internal energy.

Solution:

a) \(W = P\Delta V = 1.5 \times 10^5 \times (0.05 - 0.02) = 1.5 \times 10^5 \times 0.03 = 4500\, \text{J}\).

b) \(\Delta U = Q - W = 8000 - 4500 = 3500\, \text{J}\) (the internal energy increased).


Example 3: Carnot Cycle Efficiency

A heat engine operates between a hot reservoir at temperature \(T_h = 500\, \text{K}\) and a cold reservoir at \(T_c = 300\, \text{K}\). Calculate: a) The maximum possible efficiency. b) If the engine absorbs \(Q_h = 2000\, \text{J}\) in each cycle, calculate the work done and the heat expelled.

Solution:

a) \(\eta_{max} = 1 - \frac{T_c}{T_h} = 1 - \frac{300}{500} = 1 - 0.6 = 0.4 = 40\%\).

b) \(W = \eta \times Q_h = 0.4 \times 2000 = 800\, \text{J}\).

\(Q_c = Q_h - W = 2000 - 800 = 1200\, \text{J}\).


Example 4: Heating Water

How much heat is needed to raise the temperature of \(2\, \text{kg}\) of water from \(20^\circ\text{C}\) to \(80^\circ\text{C}\)? The specific heat of water is \(c = 4186\, \text{J/(kg·°C)}\).

Solution:

\(Q = mc\Delta T = 2 \times 4186 \times (80 - 20) = 2 \times 4186 \times 60 = 502,320\, \text{J} \approx 502\, \text{kJ}\).


Example 5: Change of State (Evaporation of Water)

How much heat is needed to convert \(0.5\, \text{kg}\) of water at \(100^\circ\text{C}\) into steam at the same temperature? The latent heat of vaporization of water is \(L_v = 2.26 \times 10^6\, \text{J/kg}\).

Solution:

\(Q = mL_v = 0.5 \times 2.26 \times 10^6 = 1.13 \times 10^6\, \text{J} = 1130\, \text{kJ}\).

Note that the amount of heat needed to vaporize water (a change of state) is much greater than that needed to heat it.


Example 6: An Adiabatic Process

An ideal gas (\(\gamma = 1.4\)) expands adiabatically from a volume \(V_1 = 0.01\, \text{m}^3\) and a pressure \(P_1 = 2 \times 10^5\, \text{Pa}\) to a volume \(V_2 = 0.02\, \text{m}^3\). Calculate the final pressure and the final temperature if \(T_1 = 400\, \text{K}\).

Solution:

For an adiabatic process: \(P_1V_1^\gamma = P_2V_2^\gamma\)

\(P_2 = P_1 \left(\frac{V_1}{V_2}\right)^\gamma = 2 \times 10^5 \times \left(\frac{1}{2}\right)^{1.4} = 2 \times 10^5 \times 0.379 = 7.58 \times 10^4\, \text{Pa}\).

To find \(T_2\): \(\frac{T_2}{T_1} = \left(\frac{V_1}{V_2}\right)^{\gamma-1} = \left(\frac{1}{2}\right)^{0.4} = 0.757\) → \(T_2 = 400 \times 0.757 = 302.8\, \text{K}\).

Important Comparison Tables

Comparison: Thermodynamic Processes

ProcessCondition\(\Delta U\)\(Q\)\(W\)
Isothermal (constant T)\(\Delta T = 0\)0\(Q = W\)\(nRT\ln(V_2/V_1)\)
Adiabatic (no heat exchange)\(Q = 0\)\(\Delta U = -W\)0\(-\Delta U\)
Isobaric (constant P)\(\Delta P = 0\)\(nC_V\Delta T\)\(nC_P\Delta T\)\(P\Delta V\)
Isochoric (constant V)\(\Delta V = 0\)\(Q\)\(nC_V\Delta T\)0

Comparison: Heat Capacities of Some Substances

SubstanceSpecific heat (J/kg·K)Melting point (°C)Boiling point (°C)
Water41860100
Aluminum9006602519
Copper38510852562
Iron45015382861
Mercury140-39357

CSCA Tips and Common Mistakes

Important Tips for the CSCA Test

Common Mistakes

MistakeCorrection
Using degrees Celsius in the gas lawsAlways convert to kelvin (\(K = °C + 273\))
Confusing Q and T in equationsQ = the amount of heat (J), T = the temperature (K or °C)
Forgetting that \(\Delta U = 0\) in an isothermal processAt constant T: \(\Delta U = 0\) for an ideal gas
Confusion about the sign of the first law (some books: \(\Delta U = Q + W\))The CSCA test uses \(\Delta U = Q - W\) (W is positive when the gas does work)
Forgetting to convert the mass from g to kg in \(Q = mc\Delta T\)\(c\) is usually in J/(kg·°C), so use kg
Using \(\eta = 1 - T_c/T_h\) without converting to kelvinT_c and T_h must be in kelvin!

Additional Exercises with Solutions

Exercise 1: Boyle's Law (Compression)

A gas has a volume of \(V_1 = 5\, \text{L}\) at a pressure of \(P_1 = 2\, \text{atm}\). If the gas is compressed to a volume of \(V_2 = 2\, \text{L}\) while the temperature remains constant, calculate the new pressure.

Solution:

\(P_1V_1 = P_2V_2\) → \(2 \times 5 = P_2 \times 2\) → \(P_2 = 5\, \text{atm}\).


Exercise 2: Charles's Law

A balloon has a volume of \(3\, \text{L}\) at a temperature of \(27^\circ\text{C}\). What is its volume at \(127^\circ\text{C}\) if the pressure remains constant?

Solution:

\(T_1 = 27 + 273 = 300\, \text{K}\), \(T_2 = 127 + 273 = 400\, \text{K}\).

\(\frac{V_1}{T_1} = \frac{V_2}{T_2}\) → \(V_2 = V_1 \times \frac{T_2}{T_1} = 3 \times \frac{400}{300} = 4\, \text{L}\).


Exercise 3: An Isothermal Process

One mole of an ideal gas expands isothermally at \(T = 300\, \text{K}\) from \(V_1 = 10\, \text{L}\) to \(V_2 = 20\, \text{L}\). Calculate the work done. (\(R = 8.314\, \text{J/(mol·K)}\)).

Solution:

\(W = nRT\ln\left(\frac{V_2}{V_1}\right) = 1 \times 8.314 \times 300 \times \ln(2) = 2494.2 \times 0.693 = 1728\, \text{J}\).


Exercise 4: Mixing Substances at Different Temperatures

\(0.3\, \text{kg}\) of copper at \(200^\circ\text{C}\) is placed in \(0.5\, \text{kg}\) of water at \(20^\circ\text{C}\) in an insulated calorimeter. The specific heat of copper is \(385\, \text{J/(kg·K)}\) and that of water is \(4186\, \text{J/(kg·K)}\). Calculate the final equilibrium temperature.

Solution:

The heat lost by the copper = the heat gained by the water:

\(m_{Cu}c_{Cu}(T_{Cu} - T_f) = m_w c_w (T_f - T_w)\)

\(0.3 \times 385 \times (200 - T_f) = 0.5 \times 4186 \times (T_f - 20)\)

\(115.5(200 - T_f) = 2093(T_f - 20)\)

\(23100 - 115.5T_f = 2093T_f - 41860\)

\(23100 + 41860 = 2093T_f + 115.5T_f\)

\(64960 = 2208.5T_f\) → \(T_f \approx 29.4^\circ\text{C}\).


Exercise 5: Heat Engine Efficiency

A car engine produces \(200\, \text{kJ}\) of work per cycle and absorbs \(600\, \text{kJ}\) of heat. Calculate its efficiency and the amount of heat expelled.

Solution:

\(\eta = \frac{W}{Q_h} = \frac{200}{600} = 0.333 = 33.3\%\).

\(Q_c = Q_h - W = 600 - 200 = 400\, \text{kJ}\).

Practise this lesson

Free · three languages · works offline

CSCA Academy — Independent CSCA exam preparation. الدروس · CSCA