An inequality compares two quantities using <, >, ≤, ≥, and follows properties of addition, subtraction, and multiplication, with sign reversal when multiplying or dividing by a negative number.
An inequality (Inequality) is a mathematical relation that compares two quantities using comparison symbols: \(<\), \(>\), \(\leq\), \(\geq\).
Inequality symbols
Symbol
Meaning
\(<\)
Less than
\(>\)
Greater than
\(\leq\)
Less than or equal to
\(\geq\)
Greater than or equal to
Intervals
Type
Symbol
Inequality
Closed
\([a, b]\)
\(a \leq x \leq b\)
Open
\((a, b)\)
\(a < x < b\)
Half-open
\([a, b)\)
\(a \leq x < b\)
Unbounded
\([a, \infty)\)
\(x \geq a\)
Explanation and justification of each rule
The symbols \(<\) and \(>\) are used when equality is not allowed between the two sides, while \(\leq\) and \(\geq\) are used when equality is allowed, to cover all possible cases in numerical comparison.
Step-by-step solved examples
Solving the inequality: \(2x - 5 < 7\)
First step: Add 5 to both sides: \(2x - 5 + 5 < 7 + 5\) → \(2x < 12\)
Second step: Divide both sides by 2: \(\frac{2x}{2} < \frac{12}{2}\) → \(x < 6\)
Result: \(x \in (-\infty, 6)\) or \(x < 6\)
Solving the inequality: \(-3x + 4 \geq 10\)
Step 1: Subtract 4 from both sides: \(-3x + 4 - 4 \geq 10 - 4\) → \(-3x \geq 6\)
Step 2: Divide both sides by -3 (reverse the inequality direction because dividing by a negative): \(\frac{-3x}{-3} \leq \frac{6}{-3}\) → \(x \leq -2\)
Result: \(x \in (-\infty, -2]\) or \(x \leq -2\)
Common Mistakes List with Correction for Each Error
Error: Forgetting to reverse the inequality direction when multiplying or dividing by a negative number.
Correction: When multiplying or dividing both sides by a negative number, the inequality symbol must be reversed: from \(<\) to \(>\) or from \(\leq\) to \(\geq\).
Error: Writing an open interval using square brackets such as \([a, b]\) instead of \((a, b)\).
Correction: An open interval is denoted by \((a, b)\) because the endpoints are not included, while \([a, b]\) denotes a closed interval where the endpoints are included.
Error: Treating \(\infty\) as a number that the variable can equal, such as writing \(x = \infty\).
Correction: \(\infty\) is not a real number, but a symbol indicating unboundedness, so \(x = \infty\) cannot be written; instead, write \(x > a\) or \(x \geq a\) with interval \([a, \infty)\) or \((a, \infty)\).
Test Tips
Always remember to reverse the inequality direction when multiplying or dividing by a negative number.
Check the type of interval (closed, open, half-open) using bracket symbols: \([ ]\) means inclusion of the endpoint, \(( )\) means exclusion of the endpoint.
When solving inequalities, isolate the variable step by step while maintaining balance on both sides.
Do not write \(\infty\) as a number; use it only in the context of unbounded intervals such as \([a, \infty)\) or \((-\infty, b]\).
After solving, substitute a value from the interval into the original inequality to verify the solution.
Basic Laws and Formulas
Basic Properties of Inequalities
Property
Formula
Addition/Subtraction
If \(a < b\), then \(a + c < b + c\)
Multiplication by a Positive Number
If \(a < b\) and \(c > 0\), then \(ac < bc\)
Multiplication by a Negative Number
If \(a < b\) and \(c < 0\), then \(ac > bc\) (reverse the inequality sign)
Reason: Adding or subtracting a constant from both sides does not change the order of numbers because the operation is applied equally to both sides. Multiplying by a positive number preserves the direction because multiplying by a positive number does not change the sign of the number, while multiplying by a negative number reverses the direction because every number multiplied by a negative changes its sign, thus reversing the order.
Example 1: Solve the inequality \(2x - 5 < 7\)
Solution: Step by step
Add 5 to both sides: \(2x - 5 + 5 < 7 + 5\) → \(2x < 12\)
Divide both sides by 2 (positive): \(\frac{2x}{2} < \frac{12}{2}\) → \(x < 6\)
Example 2: Solve the inequality \(-3x + 4 \geq 10\)
Solution: Step by step
Subtract 4 from both sides: \(-3x + 4 - 4 \geq 10 - 4\) → \(-3x \geq 6\)
Divide both sides by \(-3\) (negative, so reverse the inequality): \(\frac{-3x}{-3} \leq \frac{6}{-3}\) → \(x \leq -2\)
Common Mistakes
Error: Forgetting to reverse the inequality sign when dividing or multiplying by a negative number. Example: From \(-2x > 6\), the student writes \(x > -3\).
Correction: When dividing by \(-2\) (negative), reverse the inequality: \(x < -3\).
Error: Applying addition/subtraction property to only one side. Example: From \(x + 4 < 9\), the student writes \(x < 9\) without subtracting 4 from the right side.
Correction: Subtract 4 from both sides: \(x + 4 - 4 < 9 - 4\) → \(x < 5\).
Test Tips
Always check the sign of the number you are multiplying or dividing by before applying the operation to the inequality.
Write each step clearly, and do not shorten steps that involve reversing the sign.
After solving, substitute a value from the solution into the original inequality to verify the direction is correct.
Absolute value inequality
Law
Equivalent
\(|x| < a\) (\(a>0\))
\(-a < x < a\)
\(|x| > a\) (\(a>0\))
\(x < -a\) or \(x > a\)
Reason: The absolute value \(|x|\) represents the distance of \(x\) from zero on the number line. Therefore, \(|x| < a\) means \(x\) is less than \(a\) away from zero, i.e., it lies between \(-a\) and \(a\). Meanwhile, \(|x| > a\) means \(x\) is more than \(a\) away from zero, i.e., it lies either to the left of \(-a\) or to the right of \(a\).
Example 1: Solve the inequality \(|x - 3| < 5\)
Solution: Step by step
We use the equivalent: \(-5 < x - 3 < 5\)
Add 3 to all parts: \(-5 + 3 < x - 3 + 3 < 5 + 3\) → \(-2 < x < 8\)
Example 2: Solve the inequality \(|2x + 1| \geq 7\)
Solution: Step by step
We use the equivalent of the inequality "greater than or equal to": \(2x + 1 \leq -7\) or \(2x + 1 \geq 7\)
Solve the first: \(2x \leq -8\) → \(x \leq -4\)
Solve the second: \(2x \geq 6\) → \(x \geq 3\)
Solution: \(x \leq -4\) or \(x \geq 3\)
Common Mistakes
Error: Writing \(|x| < a\) as \(x < a\) only, ignoring the negative part. Example: From \(|x| < 4\), the student writes \(x < 4\).
Correction: The correct solution is \(-4 < x < 4\).
Error: Writing \(|x| > a\) as \(-a < x < a\) (reversing the meaning). Example: From \(|x| > 2\), the student writes \(-2 < x < 2\).
Correction: The correct solution is \(x < -2\) or \(x > 2\).
Test Tips
Always remember that the absolute value produces two conditions: one for the positive case and one for the negative case.
When there is an expression inside the absolute value (such as \(|x - 3|\)), treat the expression as a whole; do not break it apart prematurely.
After solving, drawing a number line and identifying the intervals helps avoid errors in direction.
Explanation:We begin by expanding the parentheses using the distributive property, then combine like terms on each side, and finally isolate the variable\(x\)by subtracting\(2x\)from both sides and adding\(1\)for both sides, preserving the direction of the inequality since we did not multiply or divide by a negative number.
Two step-by-step solved examples:
Solution: \(4(x + 1) - 3 \geq 2x + 5\)
Step 1: \(4x + 4 - 3 \geq 2x + 5\)
Step 2: \(4x + 1 \geq 2x + 5\)
Step 3: \(4x - 2x \geq 5 - 1\)
Step 4: \(2x \geq 4\)
Step 5: \(x \geq 2\)
Result: \(x \in [2, \infty)\)
Solution: \(-2(3x - 4) < 5x + 1\)
Step 1: \(-6x + 8 < 5x + 1\)
Step 2: \(-6x - 5x < 1 - 8\)
Step 3: \(-11x < -7\)
Step 4: \(x > \frac{7}{11}\) (we reverse the direction because we divided by \(-11\))
List of "Common Mistakes" with correction for each error:
Error: Forgetting to reverse the inequality direction when multiplying or dividing by a negative number.
Correction: Whenever we multiply or divide both sides of an inequality by a negative number, we must reverse the inequality sign.
Error: Mistake in expanding the bracket, such as writing \(3(x - 2) = 3x - 2\) instead of \(3x - 6\).
Correction: We apply the distributive property precisely: \(a(b + c) = ab + ac\), so \(3(x - 2) = 3x - 6\).
Test tips: Always check the sign of the number you are multiplying or dividing by before changing the direction of the inequality, and rewrite each step clearly to avoid arithmetic errors.
Explanation:We factor the quadratic into two linear factors, then find the intersection points with the \(x\) axis (the roots). After that, we determine the sign intervals by testing a point from each interval, noting that the quadratic has a negative leading coefficient (\(x^2\) is positive), so it is positive outside the roots and negative between them.
Two step-by-step solved examples:
Solution: \(x^2 + 5x + 6 < 0\)
Step 1: Factorization: \((x + 2)(x + 3) < 0\)
Step 2: Roots: \(x = -2\), \(x = -3\)
Step 3: Sign table: negative between \(-3\) and \(-2\)
Step 4: Solution: \((-3, -2)\)
Solution: \(2x^2 - 8x \geq 0\)
Step 1: Factorization: \(2x(x - 4) \geq 0\)
Step 2: Roots: \(x = 0\), \(x = 4\)
Step 3: Sign table: positive outside \([0, 4]\) (since the coefficient \(2\) is positive)
List of "Common Mistakes" with correction for each:
Error: Forgetting that the inequality is strict (\(>\) or \(<\)) excludes the roots from the solution.
Correction: In strict inequalities, do not include points where the expression equals zero in the solution; while in non-strict inequalities (\(\geq\) or \(\leq\)), include them.
Error: Mistake in determining sign intervals, such as considering the region between the roots positive instead of negative.
Correction: We draw a number line and place the roots on it, then test a point in each interval (e.g., \(x = 0\) between \(-2\) and \(3\)) to determine the sign in that interval.
Test tips: Be sure to analyze the quadratic carefully, draw a clear sign chart, and remember that the direction of opening (upward or downward) determines where the quadratic is positive.
Explanation: We find the points where the numerator is zero (where the sign may change) and where the denominator is zero (where the expression is undefined), then test the sign of the expression in each interval between these points, keeping in mind that the point where the denominator equals zero is always excluded from the solution.
List of "Common Mistakes" with correction for each error:
Error: Neglecting to exclude the point where the denominator equals zero from the solution.
Correction: Always exclude values that make the denominator zero, as they make the expression undefined, even if they satisfy the inequality.
Error: Mistake in sign testing, such as using an incorrect point or miscalculating the ratio.
Correction: Choose an easy test point in each interval (e.g., \(-2, 0, 3\)) and substitute it into the original expression to determine the sign accurately.
Test tips:Write the critical points in increasing order, draw a number line, test one point in each interval clearly, and remember that the solution includes points where the numerator equals zero only if the inequality is non-strict (\(\leq\) or \(\geq\)).
Explanation: We use the property of absolute value: \(|A| \leq B\) (with \(B \geq 0\)) is equivalent to \(-B \leq A \leq B\). Then we solve the compound inequality by performing the same operation on all parts (adding \(3\) then dividing by \(2\)) while preserving the inequality directions.
Two step-by-step solved examples:
Solution: \(|x + 4| < 7\)
Step 1: \(-7 < x + 4 < 7\)
Step 2: \(-11 < x < 3\)
Step 3: Solution: \((-11, 3)\)
Solution: \(|3x - 2| \geq 4\)
Step 1: \(3x - 2 \leq -4\) or \(3x - 2 \geq 4\)
The second step: \(3x \leq -2\) or \(3x \geq 6\)
The third step: \(x \leq -\frac{2}{3}\) or \(x \geq 2\)
The fourth step: solution: \((-\infty, -\frac{2}{3}] \cup [2, \infty)\)
List of "Common Mistakes" with correction for each error:
Error: Writing \(|A| \leq B\) as \(A \leq B\) only, ignoring the negative part.
Correction: The absolute value being less than or equal to a positive number means the expression inside lies between the negative and positive of that number.
Error: Mistake in solving the compound inequality, such as adding a number to only one part.
Correction: When solving \(-B \leq A \leq B\), apply the same operation (addition, subtraction, multiplication, division) to all three parts at once.
Test tips: Remember that \(|A| \leq B\) gives a bounded interval, while \(|A| \geq B\) gives two rays extending to infinity, and always check that \(B\) is non-negative (if negative, no solution).
Explanation:A double inequality means that the middle expression is greater than the lower bound and less than the upper bound at the same time. We isolate ⟦303⟧x⟦304⟧ by subtracting ⟦305⟧1⟦306⟧ from all parts and then dividing by ⟦307⟧2⟦308⟧ (a positive number, so the inequality directions are not reversed).\(x\)By subtracting\(1\)from all parts and then dividing by\(2\)(a positive number, so we do not reverse the inequalities).
Two step-by-step solved examples:
Solution: \(1 < 4x - 5 < 11\)
First step: \(6 < 4x < 16\)
Second step: \(\frac{3}{2} < x < 4\)
Third step: Solution: \(\left(\frac{3}{2}, 4\right)\)
Solution: \(-8 \leq -3x + 2 \leq 4\)
First step: \(-10 \leq -3x \leq 2\)
Second step: \(\frac{10}{3} \geq x \geq -\frac{2}{3}\) (We reverse the inequality signs because we divided by \(-3\))
Third step: Rearranging: \(-\frac{2}{3} \leq x \leq \frac{10}{3}\)
List of "Common Errors" with correction for each error:
Error: Forgetting to apply the operation to all three parts in the double inequality.
Correction: When solving \(a < bx + c < d\), we subtract \(c\) or add it, then divide or multiply by \(b\), and apply the operation to \(a\), \(bx + c\), and \(d\) simultaneously.
Error: Mistake in reversing the direction when dividing or multiplying by a negative number in the double inequality.
Correction: If we divide or multiply by a negative number, we reverse the direction of both inequalities (the smaller becomes larger and the larger becomes smaller), then reorder the terms so that the smaller is on the left.
Test Tips: Treat the double inequality as two separate conditions if necessary, and always check that the variable is isolated in the middle, and that the directions are logical (smaller < variable < larger).
Example 6: Application
The sum of two consecutive integers is greater than 25. What are they?
Solution: \(x + (x + 1) > 25 \rightarrow 2x > 24 \rightarrow x > 12\). The numbers are: \(13\) and \(14\) or more.
Explanation:Let the first integer be \(x\) (an integer), then the next consecutive integer is \(x + 1\). We form the inequality according to the condition (sum greater than 25), then solve it to obtain the values of \(x\) that satisfy the condition, and finally determine the integers that immediately follow \(x\).
Two step-by-step solved examples:
Example: The difference of two consecutive integers is less than 10. What are they?
Step 1: Let the first integer be \(x\) and the second be \(x + 1\)
Step 2: The difference: \((x + 1) - x = 1\) (constant, always less than 10)
Step 3: Therefore, any two consecutive integers satisfy the condition
Step 4: Solution: All pairs such as \((1, 2)\), \((5, 6)\), \((-3, -2)\), etc.
Example: The product of two consecutive integers is greater than 20. What are they?
Step 1: \(x(x + 1) > 20\)
Step 2: \(x^2 + x - 20 > 0\)
Step 3: Factoring: \((x + 5)(x - 4) > 0\)
Step 4: Roots: \(x = -5\), \(x = 4\)
Step 5: Sign chart: Positive outside \([-5, 4]\)
Step 6: Solution: \(x < -5\) or \(x > 4\)
Step 7: Since \(x\) is an integer, the pairs are: \((-6, -5)\), \((-7, -6)\), ... or \((5, 6)\), \((6, 7)\), ...
List of "Common Mistakes" with correction for each:
Error: Incorrect representation of consecutive integers, such as \(x\) and \(x + 2\) (these are consecutive odd integers).
Correction: Consecutive integers always differ by one, so represent them as \(x\) and \(x + 1\) (or \(x - 1\) and \(x\)).
Error: Forgetting that \(x\) must be an integer in problems asking for integers.
Correction: After solving the inequality, determine the integer values of \(x\) that satisfy it, then compute the consecutive integers based on them.
Test tips: Read the question carefully to determine whether it asks for integers, natural numbers, or real numbers, and choose the appropriate variable representation (\(x\) for an integer, \(2k\) for an even number, etc.), and verify that the solution satisfies the original conditions.
Illustrative SVG Diagrams
Figure 1: Number line for inequalities
Figure 2: Types of intervals
Figure 3: Sign chart
To solve inequalities using the number line and sign chart, we follow a systematic procedure that ensures accuracy and avoids common mistakes. First, we identify the critical points where the expression equals zero, then divide the number line into intervals based on these points. Next, we select a test point from each interval and substitute it into the original expression to determine the sign of the result in that interval. Finally, we combine the intervals that satisfy the required condition (e.g., greater than zero) and express the solution using appropriate interval notation (open, closed, unbounded).
Example 1: Solve the inequality (x-3)(x+2) > 0
Solution: Step by step
We find the intersection points by solving (x-3)(x+2) = 0 → x = 3 or x = -2.
We divide the number line into three intervals: (-∞, -2), (-2, 3), (3, ∞).
We choose a test point from each interval:
For the interval (-∞, -2): we choose x = -3 → (-3-3)(-3+2) = (-6)(-1) = 6 > 0 → positive.
For the interval (-2, 3): we choose x = 0 → (0-3)(0+2) = (-3)(2) = -6 < 0 → negative.
For the interval (3, ∞): we choose x = 4 → (4-3)(4+2) = (1)(6) = 6 > 0 → positive.
We collect the intervals where the expression is positive: (-∞, -2) and (3, ∞).
We write the solution: \(x \in (-\infty, -2) \cup (3, \infty)\).
Example 2: Solve the inequality x^2 - 5x + 6 ≤ 0
Solution: Step by step
We factor the expression: x^2 - 5x + 6 = (x-2)(x-3).
We find the intersection points: (x-2)(x-3) = 0 → x = 2 or x = 3.
We divide the number line into three intervals: (-∞, 2), (2, 3), (3, ∞).
We select a test point from each interval:
For the interval (-∞, 2): choose x = 0 → (0-2)(0-3) = (-2)(-3) = 6 > 0.
For the interval (2, 3): choose x = 2.5 → (2.5-2)(2.5-3) = (0.5)(-0.5) = -0.25 < 0.
For the interval (3, ∞): choose x = 4 → (4-2)(4-3) = (2)(1) = 2 > 0.
Since the inequality is ≤ 0, we take the intervals where the expression is negative or zero.
We include the points where the expression equals zero (x = 2 and x = 3) because the condition includes equality.
We write the solution: \(x \in [2, 3]\).
Common Mistakes
Error: Forgetting to include the intersection points in the solution when the inequality includes equality (≤ or ≥). Correction: Always check the inequality symbol; if it is ≤ or ≥, include the points where the expression equals zero in the solution using square brackets [ ].
Error: Choosing a test point that lies exactly at an intersection point, resulting in a zero value and confusion in determining the sign. Correction: Choose a test point within the open interval, not on the boundary; for example, for the interval (2, 3), choose 2.5, not 2 or 3.
Error: Mixing up the order of intervals on the number line, leading to incorrect sign assignments. Correction: Arrange the intersection points from smallest to largest before dividing the number line; for example, for x = -2 and x = 3, start from -∞ to -2, then -2 to 3, then 3 to ∞.
Test Tips
Always draw the number line and clearly mark the intersection points before starting the sign chart.
Use the sign chart only when the expression can be factored into linear factors; otherwise, consider other methods such as completing the square or using the quadratic formula.
Verify the final solution by substituting a value from each interval into the original inequality to ensure correctness.
Pay attention to symbols: use parentheses ( ) for endpoints not included in the solution, and brackets [ ] for endpoints that are included.
Comparison Tables
Comparison: Types of Inequalities
Type
Form
Solution Method
Linear
\(ax + b > 0\)
Isolate the variable, reverse the inequality when multiplying by a negative
Quadratic
\(ax^2 + bx + c > 0\)
Factor + sign chart
Rational
\(\frac{P(x)}{Q(x)} > 0\)
Move terms + common denominator + sign chart
Absolute Value
\(|ax + b| < c\)
Convert to a double inequality
Comparison: equation vs inequality
Property
Equation
Inequality
Solution result
Specific value
Full range of values
Multiplying by a negative
No effect
Reverses the sign
Reason and cause
To solve linear inequalities such as \(ax + b > 0\)We isolate the variable\(x\)by subtracting\(b\)then divide by\(a\)If \(a\)If ⟦17⟧a⟦18⟧ is negative, the direction of the inequality reverses because multiplying by a negative number flips the order on the number line. This follows from the order property of real numbers: if \(a < b\)To solve linear inequalities such as ⟦9⟧ax + b > 0⟦10⟧, we isolate the variable ⟦11⟧x⟦12⟧ by subtracting ⟦13⟧b⟦14⟧ and then dividing by ⟦15⟧a⟦16⟧. If ⟦17⟧a⟦18⟧ is negative, the direction of the inequality reverses because multiplying by a negative number flips the order on the number line. This follows from the order property of real numbers: if ⟦19⟧a < b⟦20⟧ and ⟦21⟧c < 0⟦22⟧, then ⟦23⟧ac > bc⟦24⟧.\(c < 0\)Then\(ac > bc\).
For quadratic inequalities \(ax^2 + bx + c > 0\), we factor the expression into linear factors if possible, then determine the roots of the equation \(ax^2 + bx + c = 0\), which divide the number line into intervals. We select a test point from each interval and substitute it into the original expression to determine the sign of the result. This method relies on the Intermediate Value Theorem and the continuity of the quadratic function, which changes sign only at its roots.
For rational inequalities \(\frac{P(x)}{Q(x)} > 0\), we move all terms to one side and set the other side to zero, then combine into a single fraction with a common denominator. Next, we find the roots of the numerator and denominator, which are points of discontinuity or sign change. We place these points on the number line and construct a sign chart to determine the intervals where the fraction is positive. This ensures we do not overlook points where the denominator is zero, making the expression undefined.
For absolute value inequalities \(|ax + b| < c\) with \(c > 0\), we use the definition that the absolute value being less than a positive number means the inner expression lies between the negative and positive of that number. That is, \(-c < ax + b < c\). This transformation is based on the definition of absolute value: \(|x| < d \iff -d < x < d\) for \(d > 0\). If \(c \leq 0\), there is no solution because the absolute value cannot be negative or strictly less than a non-positive number, except in a special case that does not apply here.
Step-by-step solved examples
Solve the inequality: \(3x - 7 > 5\).
Add 7 to both sides: \(3x - 7 + 7 > 5 + 7\) → \(3x > 12\).
Divide by 3 (positive, so inequality direction remains): \(x > 4\).
Divide the number line into intervals: \((-\infty, 2)\), \((2, 3)\), \((3, \infty)\).
Choose a test point: \(x = 0\) in the first interval → \((0-2)(0-3) = (-2)(-3) = 6 > 0\) → positive.
Choose \(x = 2.5\) in the second interval → \((0.5)(-0.5) = -0.25 < 0\) → negative.
Choose \(x = 4\) in the third interval → \((2)(1) = 2 > 0\) → positive.
Since the inequality is strictly greater than zero, we take the intervals where the expression is positive: \((-\infty, 2) \cup (3, \infty)\).
Common Mistakes List
Error: Forgetting to reverse the inequality sign when dividing by a negative number in a linear inequality.
Incorrect example: To solve \(-2x > 6\), the student writes \(x > -3\) without reversing the sign.
Correction: When dividing by \(-2\) (negative), the inequality sign must be reversed: \(x < -3\).
Error: Overlooking discontinuities of the denominator in rational inequalities.
Incorrect example: To solve \(\frac{x-1}{x+2} > 0\), the student ignores that \(x \neq -2\) and includes \(-2\) in the solution set.
Correction: \(x = -2\) must be excluded because it makes the denominator zero and the expression undefined. The correct solution is \((-\infty, -2) \cup (1, \infty)\).
Error: Incorrectly applying the absolute value rule when the right-hand side is negative or zero.
Incorrect example: To solve \(|x+1| < -2\), the student writes \(-2 < x+1 < 2\).
Correction: Since absolute value cannot be less than a negative number, there is no solution. The solution set is empty.
Test Tips
Always check the sign of the coefficient when isolating the variable in linear inequalities; if negative, remember to reverse the inequality sign.
In quadratic inequalities, compute the discriminant first to predict the number of roots and the nature of the expression.
In rational inequalities, write the conditions for the denominator not being zero before starting the solution, and remember to exclude these points from the final solution set.
For absolute value inequalities, ensure the right-hand side is positive before applying the conversion rule; otherwise, the solution may be empty or all real numbers.
Use the sign chart systematically: place the roots and discontinuity points on the number line, choose a test point from each interval, and substitute into the original factored expression.
Review the final solution set to ensure it satisfies the original inequality, especially at the boundary points.
CSCA Tips and Common Mistakes
Important Tips for the CSCA Test
📌 Reversing the Inequality Sign:When multiplying or dividing by a negative number, reverse the inequality direction immediately. This is the most common mistake on the test. Reason: Multiplying or dividing by a negative number reverses the order of numbers on the number line, so the inequality direction must be changed to maintain the truth of the relationship.
📌 Write the Solution as an Interval:Express the solution set as an interval, such as \([a,b]\) or \((-\infty, a)\). Reason: Representing the solution as an interval clearly shows the set of all values that satisfy the inequality, making it easier to check and compare during the test.
📌 Rational Inequalities:Do not multiply directly by the denominator! Move all terms to one side and combine denominators. Reason: Multiplying the inequality by a denominator that could be negative without awareness may lead to an unintended sign reversal; moving terms and combining denominators ensures accurate analysis of the denominator's sign.
📌 Excluding Zero Denominator:In rational inequalities, exclude points that make the denominator equal to zero. Reason: Division by zero is undefined in mathematics, so these points must be excluded from the solution set even if they satisfy the inequality after simplification.
📌 Absolute Value:Remember \(|x| \geq 0\) always.\(|x| < a \rightarrow -a < x < a\) (for \(a > 0\)). Reason: Absolute value defines distance from zero and is never negative; the inequality \(|x| < a\) means that \(x\) is less than \(a\) away from zero in both directions.
📌 Check Your Solution:Substitute a value from the solution into the original inequality to verify. Reason: Substitution prevents errors arising from algebraic mistakes, forgetting to reverse the inequality sign, or omitting critical points.
Common Mistakes
Error
Correction
Forgetting to reverse the inequality sign when multiplying by a negative
\(-2x > 6 \rightarrow x < -3\)
Multiplying a rational inequality directly by the denominator
Move terms to one side and combine denominators first
Forgetting to exclude undefined points
The denominator \(\neq 0\) is always
Worked Examples Step by Step
Example 1:Solve the inequality \(\frac{x-2}{x+3} \leq 0\). Solution: Step 1: Identify the zeros and undefined points: the numerator is zero at \(x=2\), the denominator is zero at \(x=-3\). Step 2: Place these points on the number line, dividing it into intervals: \((-\infty, -3)\), \((-3, 2]\), \([2, \infty)\). Step 3: Choose a test value from each interval and determine the sign of the expression: - In \((-\infty, -3)\): take \(x=-4\) → \(\frac{-4-2}{-4+3} = \frac{-6}{-1} = 6 > 0\) → does not satisfy. - In \((-3, 2]\): take \(x=0\) → \(\frac{0-2}{0+3} = \frac{-2}{3} < 0\) → satisfies. - In \([2, \infty)\): take \(x=3\) → \(\frac{3-2}{3+3} = \frac{1}{6} > 0\) → does not satisfy. Step 4: Check the equality point: at \(x=2\), the value equals zero → satisfies (because the inequality \(\leq\)). Step 5: Exclude the undefined point: \(x=-3\) makes the denominator zero → excluded. Step 6: Write the solution as an interval: \((-3, 2]\). Verification:Take \(x=0\) (from the solution): \(\frac{0-2}{0+3} = -\frac{2}{3} \leq 0\) → correct.
Example 2: Solve the inequality \(|2x-5| < 7\). Solution: Step 1: Use the absolute value property: \(|A| < B \leftrightarrow -B < A < B\) (for \(B>0\)). Here \(A=2x-5\), \(B=7\), and since \(7>0\), we have: \(-7 < 2x-5 < 7\). Step 2: Add 5 to all parts: \(-7+5 < 2x < 7+5\) → \(-2 < 2x < 12\). Step 3: Divide all parts by 2 (a positive number, so the inequality direction does not change): \(\frac{-2}{2} < x < \frac{12}{2}\) → \(-1 < x < 6\). Step 4: Write the solution as an interval: \((-1, 6)\). Check: Take \(x=0\) (from the solution): \(|2\cdot0-5| = |-5| = 5 < 7\) → True. Take \(x=-2\) (outside the solution): \(|2\cdot(-2)-5| = |-4-5| = 9 \nless 7\) → It is correct that it does not satisfy.
Test Tips
Always start by identifying points of undefinedness (denominator = zero) in rational inequalities before any algebraic manipulation.
When dealing with absolute value, remember that \(|x| < a\) is equivalent to \(-a < x < a\) only when \(a>0\); if \(a\leq 0\), there is no solution.
After solving any inequality, substitute a value from each suspected interval into the original inequality to avoid errors from multiplying by a negative or forgetting to exclude a point.
Always write the final solution as an interval using correct brackets: \([ ]\) for inclusive, \(( )\) for exclusive.
Be careful not to use the symbols \(<\) or \(>\) outside LaTeX; write all comparisons inside \( ... \) as in \(0 < x < 1\).
Additional Exercises with Solutions
Exercise 1: Linear Inequality
Solution: \(5 - 2x \geq 3x + 10\)
Solution: We collect like terms by subtracting \(3x\) from both sides and subtracting \(5\) from both sides, we obtain \(-2x - 3x \geq 10 - 5\), that is \(-5x \geq 5\). Then we divide both sides by \(-5\), remembering that dividing by a negative number reverses the inequality direction, yielding \(x \leq -1\). Thus the solution set is \((-\infty, -1]\).
Explanation: When solving linear inequalities, the same operation must be applied to both sides to maintain equivalence, and when multiplying or dividing both sides by a negative number, the inequality direction must be reversed because this reflects the reversal of number order on the number line.
Two Step-by-Step Solved Examples:
Solution: \(4 - 3x \leq 2x + 7\)
Step 1: Subtract \(2x\) from both sides: \(4 - 3x - 2x \leq 7\) → \(4 - 5x \leq 7\)
Step 2: Subtract \(4\) from both sides: \(-5x \leq 3\)
Step 3: Divide by \(-5\) and reverse the direction: \(x \geq -\frac{3}{5}\)
Solution: \(\left[-\frac{3}{5}, \infty\right)\)
Solution: \(-x + 5 > 2x - 1\)
Step 1: Add \(x\) to both sides: \(5 > 3x - 1\)
Step 2: Add \(1\) to both sides: \(6 > 3x\)
Step 3: Divide by \(3\): \(2 > x\) or \(x < 2\)
Solution: \((-\infty, 2)\)
Common Mistakes:
Error: Forgetting to reverse the inequality direction when dividing by a negative number.
Correction: When dividing \(-5x \geq 5\) by \(-5\), we must write \(x \leq -1\), not \(x \geq -1\).
Error: Writing the solution as \([-1, \infty)\) instead of \((-\infty, -1]\).
Correction: Since the inequality is \(x \leq -1\), the solution starts from negative infinity and ends at \(-1\) inclusive, i.e., \((-\infty, -1]\).
Exam Tips: Always check the sign of the number you are multiplying or dividing by in an inequality, and drawing a number line helps identify the correct solution intervals.
Exercise 2: Quadratic Inequality
Solution: \(2x^2 - 5x - 3 \leq 0\)
Solution:We factor the quadratic expression: \(2x^2 - 5x - 3 = (2x + 1)(x - 3)\). Thus the inequality becomes \((2x + 1)(x - 3) \leq 0\). We find the roots by setting each factor to zero: \(2x + 1 = 0\) → \(x = -\frac{1}{2}\), and \(x - 3 = 0\) → \(x = 3\). These points divide the number line into three intervals: \((-\infty, -\frac{1}{2})\), \((- \frac{1}{2}, 3)\), and \((3, \infty)\). We test the sign of the product in each interval: in \((-\infty, -\frac{1}{2})\), both factors are negative → product positive; in \((- \frac{1}{2}, 3)\), the first factor is positive and the second negative → product negative; in \((3, \infty)\), both factors are positive → product positive. Since the inequality is \(\leq 0\), we take the intervals where the product is negative or zero, and include the roots because they satisfy equality. Therefore, the solution is \(\left[-\frac{1}{2}, 3\right]\).
Reasoning:Factoring the quadratic expression simplifies finding the roots that divide the number line into intervals; testing the sign of the product in each interval determines where the expression is negative, positive, or zero, based on the sign rule of the product: the sign of the product: (+)(+) = (+), (+)(−) = (−), (−)(−) = (+)..
Step 6: Since the inequality \(> 0\), we take the positive intervals: \((-\infty, 2) \cup (3, \infty)\)
Common Mistakes:
Error: Forgetting to include the roots in the solution when the inequality is non-strict (\(\leq\) or \(\geq\)).
Correction: In \(2x^2 - 5x - 3 \leq 0\), the roots \(x = -\frac{1}{2}\) and \(x = 3\) satisfy equality, so they must be included in the solution: \(\left[-\frac{1}{2}, 3\right]\).
Error: Confusing test intervals and selecting incorrect intervals based on an incorrect sign.
Correction: After finding the roots, draw a number line, mark the roots, then choose a test point in each interval (e.g., \(x = -1\), \(x = 0\), \(x = 4\)) and substitute into the factored form to determine the sign.
Test Tips:Always solve the related quadratic equation first to obtain the roots, then use the interval method or table method to determine the sign of the expression in each interval, and check the type of inequality (\(\leq\), \(\geq\), \(<\), \(>\)) to determine whether the roots are included or not.
Exercise 3: Rational Inequality
Solution: \(\frac{x^2 - 4}{x - 1} > 0\)
Solution:We factor the numerator: \(x^2 - 4 = (x - 2)(x + 2)\). Thus the inequality becomes \(\frac{(x - 2)(x + 2)}{x - 1} > 0\). The critical points are the values that make the numerator or denominator zero: \(x = -2\) (from the numerator), \(x = 1\) (from the denominator, excluded because it makes the denominator zero), and \(x = 2\) (from the numerator). These points divide the number line into four intervals: \((-\infty, -2)\), \((-2, 1)\), \((1, 2)\), and \((2, \infty)\). We test the sign of the fraction in each interval: In \((-\infty, -2)\): numerator: \(( - ) \times ( - ) = +\), denominator: \( - \) → fraction: \(+ / - = -\); in \((-2, 1)\): numerator: \(( - ) \times ( + ) = -\), denominator: \( - \) → fraction: \(- / - = +\); in \((1, 2)\): numerator: \(( - ) \times ( + ) = -\), denominator: \( + \) → fraction: \(- / + = -\); in \((2, \infty)\): numerator: \(( + ) \times ( + ) = +\), denominator: \( + \) → fraction: \(+ / + = +\). Since the inequality \(> 0\) (greater than zero, not including zero), we take the intervals where the fraction is positive: \((-2, 1)\) and \((2, \infty)\). Since \(x = 1\) makes the denominator zero, it is excluded from the solution. Therefore, the solution is \((-2, 1) \cup (2, \infty)\).
Reason:In rational inequalities, values that make the denominator zero must be excluded because they are undefined in the set of real numbers. Identifying the critical points (zeros of the numerator and denominator) divides the number line into intervals where the sign of the fraction can be tested independently, since the sign of the fraction does not change within each interval.
Two step-by-step solved examples:
Solution: \(\frac{x + 3}{x - 2} \leq 0\)
Step 1: Critical points: numerator zero at \(x = -3\), denominator zero at \(x = 2\) (excluded)
Step 4: Since \(> 0\), we take the positive intervals: \((-4, -3) \cup (3, \infty)\)
Common Mistakes:
Mistake: Including the point that makes the denominator zero in the solution.
Correction: In \(\frac{x^2 - 4}{x - 1} > 0\), \(x = 1\) makes the denominator zero, so it must be excluded from the solution even if it makes the numerator zero in another expression; here the numerator is not zero at \(x = 1\), so the solution is \((-2, 1) \cup (2, \infty)\) and not \([-2, 1) \cup (2, \infty)\) or similar.
Mistake: Incorrectly factoring the numerator, leading to missing critical points.
Correction: Always factor both numerator and denominator into linear factors to accurately identify all critical points; failing to factor \(x^2 - 4\) into \((x - 2)(x + 2)\) may lead to forgetting \(x = -2\) or \(x = 2\).
Test Tips:Always factor the numerator and denominator into linear factors, identify the critical points (roots of the numerator and denominator), exclude the roots of the denominator from the solution, then use a sign chart or test a point in each interval to determine where the fraction is positive or negative according to the inequality.
Exercise 4: Absolute Value
Solution: \(|3x + 2| > 4\)
Solution:The absolute inequality \(|A| > B\) (where \(B > 0\)) is equivalent to \(A < -B\) or \(A > B\). Here \(A = 3x + 2\) and \(B = 4\). Thus we write: \(3x + 2 < -4\) or \(3x + 2 > 4\). Solve each inequality separately: for the first, subtract \(2\) from both sides: \(3x < -6\), then divide by \(3\): \(x < -2\). For the second, subtract \(2\): \(3x > 2\), then divide by \(3\): \(x > \frac{2}{3}\). Therefore, the solution is \((-\infty, -2) \cup \left(\frac{2}{3}, \infty\right)\).
Reasoning:The definition of absolute value \(|x|\) is the distance from \(x\) to zero on the number line, so \(|A| > B\) means that \(A\) is farther from zero than \(B\), which means it lies either to the left of \(-B\) or to the right of \(B\) on the number line, resulting in two separate inequalities.
Two Step-by-Step Solved Examples:
Solution: \(|2x - 5| \geq 3\)
Step 1: \(|A| \geq B\) (with \(B > 0\)) is equivalent to \(A \leq -B\) or \(A \geq B\)
Step 1: \(|A| < B\) (with \(B > 0\)) is equivalent to \(-B < A < B\)
Step 2: Here \(A = x + 1\), \(B = 5\) → \(-5 < x + 1 < 5\)
Step 3: Subtracting \(1\) from all parts: \(-6 < x < 4\)
Step 4: Solution: \((-6, 4)\)
Common Mistakes:
Error: Writing \(|3x + 2| > 4\) as \(3x + 2 > 4\) only, ignoring the negative branch.
Correction: Both branches must be taken: \(3x + 2 < -4\) or \(3x + 2 > 4\), because the absolute value being greater than a positive number means the expression inside is either less than the negative or greater than the positive.
Error: Reversing the inequality sign when solving \(3x + 2 < -4\), such as writing \(x > -2\) instead of \(x < -2\).
Correction: When subtracting \(2\) and then dividing by \(3\) (positive), the inequality direction does not change, so \(3x < -6\) → \(x < -2\) is correct, and not \(x > -2\).
Test tips:Remember that \(|A| > B\) (with \(B \geq 0\)) leads to two inequalities: \(A < -B\) or \(A > B\), and that \(|A| < B\) leads to a compound inequality: \(-B < A < B\). Always check that \(B\) is non-negative; if \(B < 0\), then \(|A| > B\) holds for all real \(x\) (since absolute value is never negative), and \(|A| < B\) has no solution.
Exercise 5: Application
Find the domain of \(f(x) = \sqrt{x^2 - 5x + 6}\)
Solution:The domain of a function containing a square root is the set of all values that make the expression inside the root non-negative, i.e., \(x^2 - 5x + 6 \geq 0\). We factor the quadratic expression: \(x^2 - 5x + 6 = (x - 2)(x - 3)\). Thus the inequality becomes \((x - 2)(x - 3) \geq 0\). We find the roots by setting each factor equal to zero: \(x - 2 = 0\) → \(x = 2\), and \(x - 3 = 0\) → \(x = 3\). These points divide the number line into three intervals: \((-\infty, 2)\), \((2, 3)\), and \((3, \infty)\). We test the sign of the product in each interval: in \((-\infty, 2)\): \(( - ) \times ( - ) = +\); in \((2, 3)\): \(( + ) \times ( - ) = -\); in \((3, \infty)\): \(( + ) \times ( + ) = +\). Since the inequality is \(\geq 0\), we take the intervals where the product is positive or zero, and include the roots because they satisfy equality. Therefore, the domain is \((-\infty, 2] \cup [3, \infty)\).
Explanation:square root\(\sqrt{u}\)Known only when\(u \geq 0\)In the set of real numbers, so the domain of any function of the form\(\sqrt{g(x)}\)the set of all\(x\)such that\(g(x) \geq 0\)Solving this inequality determines the domain precisely.
Two step-by-step solved examples:
Find the domain of \(f(x) = \sqrt{2x^2 - 8x + 6}\)
Step 1: We set the expression inside the square root \(\geq ≥ 0\): \(2x^2 - 8x + 6 \geq ≥ 0\)
Step 2: We factor: \(2(x^2 - 4x + 3) = 2(x - 1)(x - 3) \geq ≥ 0\) → Since \(2 > 0\), it does not affect the sign, so we solve \((x - 1)(x - 3) \geq ≥ 0\)
Step 7: Since the inequality \(\leq 0\), we take the negative intervals and the roots: \([1, 3]\)
Step 8: Solution: \([1, 3]\)
Common Mistakes:
Error: Forgetting that the square root requires the radicand to be non-negative (\(\geq 0\)), not just strictly positive (\(> 0\)).
Correction: In \(\sqrt{x^2 - 5x + 6}\), the points \(x = 2\) and \(x = 3\) make the radicand zero, and the square root of zero is defined (and equals zero), so they must be included in the domain: \((-\infty, 2] \cup [3, \infty)\), not \((-\infty, 2) \cup (3, \infty)\).
Error: Incorrectly factoring the quadratic, leading to wrong roots and an incorrect domain.
Correction: Always verify factoring by multiplication; for example, \((x - 2)(x - 3) = x^2 - 5x + 6\) is correct, whereas if we wrote \((x - 1)(x - 6)\), we would get \(x^2 - 7x + 6\), which is incorrect.
Test Tips:When finding the domain of a function containing a square root, always start by setting the expression inside the radical \(\geq 0\), then solve the resulting inequality using methods such as factoring the quadratic, completing the square, or the quadratic formula, and remember that the roots that make the inside zero are included in the domain because \(\sqrt{0} = 0\) is defined.