Home · Lessons · Chemistry

Chemistry

Physical Chemistry

Physical chemistry integrates chemistry and physics to study chemical phenomena, including thermodynamics, electrochemistry, cell potential, and the Nernst equation.

In this lesson
  1. Basic Concepts and Definitions
  2. Laws and Main Formula Tables
  3. Detailed Solved Examples
  4. Schematic and Explanatory Diagrams
  5. Important Comparison Tables
  6. CSCA Tips and Common Mistakes
  7. Additional Exercises with Solutions

Basic Concepts and Definitions

Physical ChemistryPhysical Chemistry integrates the principles of chemistry and physics to study chemical phenomena. It includes electrochemistry, colligative properties, thermodynamics, and Gibbs energy.

Table of Basic Terms

TermSymbolDefinition
Galvanic cellGalvanic CellA cell that spontaneously converts chemical energy into electrical energy
AnodeAnodeThe electrode at which oxidation occurs (electrons are lost)
CathodeCathodeThe electrode at which reduction occurs (gains electrons)
Standard cell potentialE°cellThe potential difference between the cathode and the anode under standard conditions
Colligative propertiesColligative PropertiesProperties of solutions that depend only on the number of solute particles
Osmotic pressureOsmotic Pressure (π)The pressure required to stop the flow of solvent through a semipermeable membrane
EntropyEntropy (S)A measure of the randomness or disorder in a system
Gibbs free energyGibbs Free Energy (G)A measure of the energy available to do work at constant temperature and pressure

Laws and Main Formula Tables

Table of Laws and Formulas

Law / ConceptFormulaExplanation
Standard cell potential\(E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode}\)Potential difference between the two electrodes under standard conditions
Nernst equation\(E = E^\circ - \frac{RT}{nF}\ln Q\)Cell potential under non-standard conditions
Nernst equation (simplified form)\(E = E^\circ - \frac{0.0592}{n}\log Q \ (25°C)\)At 25°C, RT/F = 0.0257 V × ln10 ≈ 0.0592 V
Boiling point elevation\(\Delta T_b = K_b \times m \times i\)K_b = ebullioscopic constant (boiling point elevation constant), m = molality, i = van 't Hoff factor
Freezing point depression\(\Delta T_f = K_f \times m \times i\)K_f = cryoscopic constant (freezing point depression constant)
Osmotic pressure\(\pi = iMRT\)M = molarity, i = van 't Hoff factor, R = gas constant, T = temperature
Gibbs energy\(\Delta G = \Delta H - T\Delta S\)Determines the spontaneity of a reaction (ΔG < 0 indicates a spontaneous process)
Gibbs energy and equilibrium\(\Delta G^\circ = -RT\ln K\)Relates thermodynamics to the equilibrium constant

Detailed Solved Examples

Detailed Solved Examples

Example 1: Calculating the Standard Cell Potential

Calculate the standard cell potential for a Zn/Cu cell, given that \(E^\circ_{Zn^{2+}/Zn} = -0.76\, V\) and \(E^\circ_{Cu^{2+}/Cu} = +0.34\, V\). Identify the anode and the cathode.

Solution:

The higher reduction potential (Cu) is the cathode (undergoes reduction). The lower reduction potential (Zn) is the anode (undergoes oxidation).

\(E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode} = 0.34 - (-0.76) = 1.10\, V\)

Overall reaction: \(Zn(s) + Cu^{2+}(aq) \rightarrow Zn^{2+}(aq) + Cu(s)\)


Example 2: Applying the Nernst Equation

A Zn/Cu cell at 25°C with non-standard concentrations: \([Zn^{2+}] = 0.01\, M\), \([Cu^{2+}] = 1.0\, M\). Calculate E. (\(E^\circ = 1.10\, V, n = 2\))

Solution:

\(E = E^\circ - \frac{0.0592}{n}\log Q\)

\(Q = \frac{[Zn^{2+}]}{[Cu^{2+}]} = \frac{0.01}{1.0} = 0.01\)

\(E = 1.10 - \frac{0.0592}{2}\log(0.01) = 1.10 - 0.0296 \times (-2) = 1.10 + 0.0592 = 1.159\, V\)


Example 3: Calculating Osmotic Pressure

Calculate the osmotic pressure of a 0.1 M NaCl solution at 25°C. (NaCl dissociates completely into Na⁺ and Cl⁻)

Solution:

NaCl → Na⁺ + Cl⁻, i = 2 (two particles per formula unit).

\(\pi = iMRT = 2 \times 0.1 \times 0.0821 \times 298\)

\(\pi = 2 \times 0.1 \times 24.47 = 4.89\, atm\)


Example 4: Gibbs Energy and Spontaneity

For the reaction \(\Delta H = -50\, kJ/mol\) and \(\Delta S = -100\, J/mol\cdot K\) at 300 K. Is the reaction spontaneous?

Solution:

\(\Delta G = \Delta H - T\Delta S = -50,000 - 300 \times (-100)\)

\(\Delta G = -50,000 + 30,000 = -20,000\, J/mol = -20\, kJ/mol\)

\(\Delta G < 0\) ← The reaction is spontaneous at this temperature.


Example 5: The Relationship between ΔG° and K

Calculate K for a reaction at 25°C if \(\Delta G^\circ = -5.7\, kJ/mol\). (R = 8.314 J/mol·K)

Solution:

\(\Delta G^\circ = -RT\ln K\)

\(-5700 = -8.314 \times 298 \times \ln K\)

\(\ln K = \frac{5700}{2478} = 2.30\)

\(K = e^{2.30} \approx 10\)


Schematic and Explanatory Diagrams

Explanatory SVG diagrams

Figure 1: Electrochemical cell (Zn/Cu)

Zn/Cu galvanic cellZnSO₄ZnCuSO₄Cue⁻ →Salt bridge (KCl)Anode (oxidation)Cathode (reduction)

Figure 2: Gibbs energy versus temperature curve

Effect of temperature on ΔGΔGTΔG = ΔH - TΔST = ΔH/ΔSAt ΔG = 0

Important Comparison Tables

Important Comparison Tables

Comparison: Galvanic Cells vs. Electrolysis

PropertyGalvanic cellElectrolysis
Energy sourceSpontaneous chemical reactionExternal electrical source
ΔGNegative (spontaneous)Positive (non-spontaneous)
AnodeNegative electrode (oxidation occurs)Positive electrode (oxidation occurs)
CathodePositive electrode (reduction occurs)Negative electrode (reduction occurs)
ExampleZn/Cu cellElectrolysis of molten NaCl

Comparison: signs of ΔH, ΔS, ΔG and spontaneity

ΔHΔSΔG = ΔH - TΔSSpontaneity
− (exothermic)+ (disorder increases)always negativespontaneous at all T
+ (endothermic)− (disorder decreases)always positivenon-spontaneous at all T
− (exothermic)− (disorder decreases)negative at low Tspontaneous at low T
+ (endothermic)+ (disorder increases)negative at high Tspontaneous at high T

CSCA Tips and Common Mistakes

Important Tips for the CSCA Exam

Common Mistakes

MistakeCorrection
Reversing the anode and cathode in a galvanic cellIn a galvanic cell, the anode is where oxidation occurs (−) and the cathode is where reduction occurs (+). The opposite applies in electrolysis.
Forgetting the van 't Hoff factor (i) in colligative propertiesYou must multiply m by i to account for the dissociation of the solute.
Confusing molarity (M) with molality (m)M = mol/L of solution; m = mol/kg of solvent.
Forgetting the sign of ΔG when using ΔG° = −RT ln KIf K > 1 → ΔG° < 0. If K < 1 → ΔG° > 0
Assuming that ΔG is constant with respect to TΔG varies with T (ΔG = ΔH − TΔS)

Additional Exercises with Solutions

Additional Exercises with Solutions

Exercise 1: Calculating Cell Potential

Calculate E°cell for the cell: Mg|Mg²⁺||Ag⁺|Ag. (E°Mg²⁺/Mg=−2.37V, E°Ag⁺/Ag=+0.80V)

Solution: Mg is oxidized (anode), and Ag⁺ is reduced (cathode). E°cell = 0.80 − (−2.37) = 3.17 V.


Exercise 2: Calculating Boiling Point Elevation

Calculate ΔTb for a 0.5 m NaCl solution (Kb for water = 0.512 °C/m, i=2).

Solution: ΔTb = Kb × m × i = 0.512 × 0.5 × 2 = 0.512°C.


Exercise 3: Calculating Osmotic Pressure

Calculate π for a 0.2 M glucose (C₆H₁₂O₆) solution at 37°C. (i=1, R=0.0821)

Solution: π = 1 × 0.2 × 0.0821 × 310 = 5.09 atm.


Exercise 4: Determining Spontaneity

For a reaction, ΔH = +20 kJ/mol and ΔS = +50 J/(mol·K). Is it spontaneous at 500 K?

Solution:ΔG = 20,000 − 500 × 50 = 20,000 − 25,000 = −5,000 J/mol = −5 kJ/mol. Since ΔG < 0, the reaction is spontaneous.


Exercise 5: Relationship between K and ΔG°

If K = 100 for a reaction at 25 °C, calculate ΔG°. (R = 8.314 J/(mol·K))

Solution: ΔG° = −8.314 × 298 × ln(100) = −2478 × 4.605 = −11,414 J/mol = −11.4 kJ/mol.


Practise this lesson

Free · three languages · works offline

CSCA Academy — Independent CSCA exam preparation. الدروس · CSCA