Home · Lessons · Chemistry

Chemistry

Chemical Kinetics

Chemical kinetics studies reaction rates, influencing factors, and mechanisms, defining reaction rate, rate law, and experimentally determined reaction order.

In this lesson
  1. Basic Concepts and Definitions
  2. Laws and Main Formula Tables
  3. Detailed Solved Examples
  4. Schematic and Explanatory Diagrams
  5. Important Comparison Tables
  6. CSCA Tips and Common Mistakes
  7. Additional Exercises with Solutions

Basic Concepts and Definitions

Chemical kinetics (Chemical Kinetics) is the study of the rates of chemical reactions and the factors affecting them, and their mechanisms of occurrence.

Table of basic terms

TermSymbolDefinition
Reaction rateRateThe change in concentration of a substance (reactant or product) per unit time
Rate lawRate LawAn equation relating the reaction rate to the concentrations of the reactants
Order of reactionOrderThe sum of the exponents of the concentrations in the rate law (determined experimentally)
Rate constantkA constant proportional to the reaction rate and dependent on temperature
Activation energyEaThe minimum energy required for the reaction to occur
CatalystCatalystA substance that increases the reaction rate by lowering the activation energy without being consumed
Half-lifet₁/₂The time required for the concentration of the reactant to decrease to half
MolecularityMolecularityThe number of molecules participating in the elementary step of the reaction

Laws and Main Formula Tables

Table of Laws and Formulas

Law / ConceptFormulaExplanation
General Rate Law\(\text{Rate} = k[A]^m[B]^n\)m, n reaction order (determined experimentally)
Zero order\([A] = [A]_0 - kt\)Rate is constant, independent of concentration
First order\(\ln[A] = -kt + \ln[A]_0\)Rate is directly proportional to [A]
Second order\(\frac{1}{[A]} = kt + \frac{1}{[A]_0}\)Rate is proportional to [A]²
Half-life (first order)\(t_{1/2} = \frac{\ln 2}{k} = \frac{0.693}{k}\)It does not depend on the initial concentration
Half-life (second order)\(t_{1/2} = \frac{1}{k[A]_0}\)It depends on the initial concentration
Arrhenius equation\(k = A\,e^{-E_a/RT}\)A = frequency factor, \(E_a\) = activation energy, T = temperature
Logarithmic form of the Arrhenius equation\(\ln k = \ln A - \frac{E_a}{R}\frac{1}{T}\)\(\ln k\) vs \((1/T)\) straight line with slope = \(-E_a/R\)

Detailed Solved Examples

Detailed Solved Examples

Example 1: Determining the reaction order from experimental data

For the reaction: \(A + B → C\), the following data were obtained:

Experiment[A] (M)[B] (M)Rate (M/s)
10.10.12×10⁻³
20.20.14×10⁻³
30.10.28×10⁻³

Determine the reaction order with respect to each substance and the rate law.

Solution:

Comparing experiments 1 and 2: [A] doubles, [B] constant → rate doubles → order with respect to A = 1.

Comparing experiments 1 and 3: [B] doubles, [A] constant → rate increases fourfold → order with respect to B = 2.

Overall order = 1 + 2 = 3 (third-order reaction).

Rate law: \(\text{Rate} = k[A]^1[B]^2\)


Example 2: Calculating the half-life of a first-order reaction

A first-order reaction has a rate constant \(k = 0.0462\, s^{-1}\). Calculate: a) the half-life. b) the time required for the concentration to decrease to 25% of its initial value.

Solution:

a) \(t_{1/2} = \frac{0.693}{k} = \frac{0.693}{0.0462} = 15\, s\)

b) To reach 25% = one-quarter of the original amount, this means two half-lives have passed (50% ← 25%).

\(t = 2 \times t_{1/2} = 2 \times 15 = 30\, s\)


Example 3: Application of the Arrhenius Equation

The rate constant of a reaction at 300 K is \(k_1 = 2 \times 10^{-3}\) and at 350 K is \(k_2 = 8 \times 10^{-3}\). Calculate the activation energy Ea. (\(R = 8.314\, J/mol\cdot K\))

Solution:

Using: \(\ln\frac{k_2}{k_1} = \frac{E_a}{R}(\frac{1}{T_1} - \frac{1}{T_2})\)

\(\ln\frac{8 \times 10^{-3}}{2 \times 10^{-3}} = \ln 4 = 1.386\)

\(1.386 = \frac{E_a}{8.314}(\frac{1}{300} - \frac{1}{350}) = \frac{E_a}{8.314}(0.00333 - 0.00286) = \frac{E_a}{8.314} \times 0.000476\)

\(E_a = \frac{1.386 \times 8.314}{0.000476} = 24,203\, J/mol \approx 24.2\, kJ/mol\)


Example 4: Determining the Half-Life of a Second-Order Reaction

For a second-order reaction, the initial concentration \([A]_0 = 0.5\, M\) and the rate constant \(k = 0.04\, M^{-1}s^{-1}\). Calculate the half-life.

Solution:

For second-order: \(t_{1/2} = \frac{1}{k[A]_0} = \frac{1}{0.04 \times 0.5} = \frac{1}{0.02} = 50\, s\)

Note: The half-life for a second-order reaction depends on the initial concentration. If [A]₀ is doubled, t₁/₂ is halved.


Example 5: Effect of a catalyst on activation energy

A reaction with an activation energy of \(120\, kJ/mol\) in the absence of a catalyst has \(80\, kJ/mol\) when a catalyst is added at 300 K. By what factor does the rate increase? (\(R = 8.314\, J/mol\cdot K\))

Solution:

\(\frac{k_{cat}}{k_{no}} = \frac{A\,e^{-E_{a,cat}/RT}}{A\,e^{-E_{a,no}/RT}} = e^{(E_{a,no} - E_{a,cat})/RT}\)

\(\frac{k_{cat}}{k_{no}} = e^{(120,000 - 80,000)/(8.314 \times 300)} = e^{40,000/2494} = e^{16.04}\)

\(\frac{k_{cat}}{k_{no}} \approx 9.2 \times 10^6\) — the rate increases by approximately 9 million times!


Schematic and Explanatory Diagrams

Illustrative SVG diagrams

Figure 1: Activation Energy Curve

Activation Energy Curve (Ea)EnergyReaction PathEaWith CatalystReactantsProducts

Figure 2: First-Order Plot (ln[A] vs t)

First-Order: ln[A] vs Timeln[A]tln[A] = -kt + ln[A]₀Linear relationship → Confirms first-order kinetics

Figure 3: Comparison of Half-Lives for Different Orders

Comparison of half-lifeZero order: t₁/₂ = [A]₀ / 2kFirst order: t₁/₂ = 0.693/kSecond order: t₁/₂ = 1/(k[A]₀)First order is the only one where t₁/₂ does not depend on [A]₀

Important Comparison Tables

Important Comparison Tables

Comparison: Reaction Order

PropertyZero OrderFirst OrderSecond Order
Rate LawRate = kRate = k[A]Rate = k[A]²
Concentration Law[A] = [A]₀ - ktln[A] = -kt + ln[A]₀1/[A] = kt + 1/[A]₀
Graph (Linear)[A] vs tln[A] vs t1/[A] vs t
Half-life[A]₀/2k0.693/k1/(k[A]₀)
Dependence of t₁/₂ on [A]₀Depends LinearlyNot dependentInversely dependent

Comparison: Factors affecting reaction rate

FactorEffectReason
TemperatureRate increases with increasing TMolecular energy increases and effective collisions increase
ConcentrationRate increases with increasing concentrationNumber of collisions per unit time increases
catalystthe rate increasesit lowers the activation energy
surface area (of solid)the rate increases with increasing surface areathe number of possible collision sites increases
nature of the reactantsionic bonds react faster than covalent bondsbond strength affects the activation energy

CSCA Tips and Common Mistakes

Important tips for the CSCA test

Common mistakes

ErrorCorrection
Determining reaction order from the balanced equationOrder is determined experimentally only, not from the stoichiometric coefficients
Confusing order with molecularityOrder is empirical; molecularity = number of molecules in the elementary step (theoretical)
Believing that k does not change with temperaturek increases significantly with rising temperature (Arrhenius equation)
Forgetting the units of kUnits depend on order: zero-order M/s, first-order s⁻¹, second-order M⁻¹s⁻¹
Believing that the catalyst is consumed in the reactionThe catalyst participates and is regenerated at the end of the reaction

Additional Exercises with Solutions

Additional Exercises with Solutions

Exercise 1: Calculating the Rate Constant

For a first-order reaction, the initial concentration is 0.8 M, and after 40 seconds it becomes 0.2 M. Calculate k.

Solution:\(\ln(0.2/0.8) = -k \times 40\), \(\ln(0.25) = -1.386 = -40k\), \(k = 0.0347\, s^{-1}\)


Exercise 2: Calculating the Half-Life

If k = 0.0289 s⁻¹ for a first-order reaction, calculate t₁/₂.

Solution: \(t_{1/2} = 0.693/0.0289 = 24.0\, s\)


Exercise 3: Remaining Concentration

For a first-order reaction, k = 0.05 s⁻¹, [A]₀ = 1 M. Calculate [A] after 30 s.

Solution:\(\ln[A] = -0.05 \times 30 + \ln 1 = -1.5\), \([A] = e^{-1.5} = 0.223\, M\)


Exercise 4: Effect of Temperature

A reaction at 300 K has rate constant k₁, and at 310 K its rate constant is doubled. Calculate Ea.

Solution: \(\ln 2 = \frac{E_a}{8.314}(\frac{1}{300} - \frac{1}{310})\), \(0.693 = \frac{E_a}{8.314} \times 0.0001075\), \(E_a = \frac{0.693 \times 8.314}{0.0001075} = 53,600\, J/mol = 53.6\, kJ/mol\)


Exercise 5: Determining Reaction Order

Experimental data: at t=0, [A]=1 M; at t=10 s, [A]=0.5 M; at t=20 s, [A]=0.333 M. Determine the reaction order.

Solution:Every 10 seconds: 1→0.5 (half), 0.5→0.333 (2/3) — not a constant ratio. Test second order: 1/[A]: 1, 2, 3 — linear (increase of 1 every 10 s). Order = 2.


Practise this lesson

Free · three languages · works offline

CSCA Academy — Independent CSCA exam preparation. الدروس · CSCA